OLED Manufacturing - Newport

Femtosecond Lasers

• IceFyre® FS Femtosecond Lasers: Breakthrough high-power UV femtosecond lasers for 24/7 micromachining of critical OLED materials
• Spirit® Femtosecond Lasers: High average power, high pulse energy and high repetition rates for increased throughput

IceFyre® FS Wavelengths UV IR Power >50 W @ 1 MHz and 1.25 MHz >200 W @ 1-50 MHz Pulse Width <500 fs Repetition Rates Single Shot to 3 MHz Single Shot to 50 MHz Max Pulse Energy >50 µJ @ 1 MHz >200 µJ @ 1 MHz Other Features 24/7 industrial reliability
TimeShift™ technology for pulse control
Laser/controller in single, compact package Spirit® Wavelengths Green IR Power >15 W >30 W Pulse Width <400 fs or <500 fs Repetition Rates Single Shot to 1 MHz Max Pulse Energy >60 µJ >120 µJ Power Stability

<1% rms over 100 hrs

ORIC Electronics supply professional and honest service.

Other Features User-configurable burst mode

Picosecond Lasers

• IceFyre® Picosecond Lasers: Versatile UV, green and IR picosecond lasers: The new standard for picosecond micromachining.

IceFyre® Wavelengths UV Green IR Power Up to >50 W Pulse Width <12 ps <15 ps Repetition Rates Single Shot to 10 MHz Max Pulse Energy Up to >60 µJ Up to >100 µJ Up to >200 µJ Other Features 24/7 industrial reliability
TimeShift™ technology for pulse control
Laser/controller in single, compact package

Nanosecond Lasers

• Talon® Ace™ Laser: highest single-mode ns UV power in the industry, with TimeShift programmable pulse capability
• Talon® Nanosecond Lasers: superior combination of performance, reliability and cost.
• Quasar® High-Power Nanosecond Lasers: highest power UV and green hybrid fiber lasers, with programmable pulses, for highest throughput and quality in the industry.

Talon Ace
Talon
Quasar Wavelengths UV UV or Green UV or Green Power >100 W UV: Up to >45 W
Green: Up to >70 W UV: Up to >80 W
Green: Up to >95 W Pulse Width <2 to >50 ns UV: <25 or 40 ns
Green: <25 or 43 ns <2 to >100 ns Repetition Rates

Single shot to 5 MHz

0 to 500 kHz 0 to 3.5 MHz Max Pulse Energy Up to >500 µJ UV: Up to >500 µJ
Green: Up to µJ UV: Up to >400 µJ
Green: Up to >475 µJ Other Features 24/7 industrial reliability
TimeShift technology for pulse control
Laser/controller in single, compact package Laser/controller in single, compact package
24/7 industrial reliability
E-Pulse™ technology for superb stability 24/7 industrial reliability
TimeShift™ technology for pulse control

Lasers for OLED Panel Processing Selection Guide

Presented here is a summary of recommended MKS lasers for various OLED manufacturing applications. Please use this as a reference guide only, and always contact us to discuss your application and requirements in detail so that we may provide the best solution for you.

IceFyre® FS IceFyre® Talon® Ace™ Talon® Quasar® Spirit® UV
(fs) IR
(fs) UV
(ps) Green
(ps) IR
(ps) UV
(ns) UV
(ns) Green
(ns) UV
(ns) Green
(ns) Green
(fs) IR
(fs) Cutting Film ✓ ✓ ✓ ✓ ✓ Cutting Glass ✓ ✓ Repair ✓ ✓ ✓ Fine Metal Mask (FMM) Drilling ✓ Laser-Lift-Off (LLO) ✓ ✓ ✓ Scribing/Dicing* Silicon Die (µ-OLED) ✓ ✓ ✓ ✓ ✓ ✓ ✓

* Dicing thin wafers < 100 µm

If you want to learn more, please visit our website custom oled manufacturer.

Laser Beam Analysis

Even with the advantages that lasers provide over traditional tools, lasers systems can degrade over time, leading to reduced output power or a change in focus. This, in turn, could result in lower quality laser operations. Therefore, it is very important to monitor your laser beam frequently, and the critical parameters of the laser should be checked before and after each important step of the laser manufacturing process.

• Resolution/Sensitivity
• Long Term Stability
• Lockable
• Size and Shape

Optical component mounts are needed to hold and adjust optics. Long term stability and low drift is crucial. Minimizing drift caused by vibrations or thermal drift over time will ensure laser alignment to the desired spot and also reduce any potential downtime due to misalignment and errors. Having a locking mechanism on these mounts can also prevent misalignment of the beam, especially during shipping and also if anything else happens during usage.

HVM industrial mounts are recommended for robust long term usage in compact space. The Suprema® mirror mount is excellent for its stainless steel construction that gives better thermal performance than an aluminum mirror mount. Ultra-fine 254-TPI adjusters provide alignment sensitivity as low as 1.5 arc sec. For applications that are really concerned about the thermal changes that can be potentially caused by prolonged high powered laser usage, the ZeroDrift™ version will compensate for some thermal changes as well. For those mirror mounts that need to be set-and-forget for a long period of time, we recommend the MFM flexure mirror Mount. These are excellent for their small footprint so that machine size can be reduced.

• Suprema® Stainless Steel Mirror Mounts: the industry's best thermal performance for long-term stability.
• M-Series Aluminum Mirror Mounts: the new standard for affordable mounts.

Suprema
M-Series Optic Diameters 0.5, 1 and 2 in. 0.5, 1 and 2 in. Resolution 50, 100, 127 and 254 TPI 100 TPI Angular Range ±7° ±4° Material Stainless Steel Aluminum Drive Types Knob
Hex Key
Exchangeable Actuators Knob
Hex Key Lockable Versions Yes No Other Versions Clear-Edge
Front- and Rear-Loading
Right- and Left-Handed
Low Wavefront Distortion
ZeroDrift™ Clear-Edge
Front- and Rear-Loading
Right- and Left-Handed

• HVM Top-Adjust Mirror Mounts: for use in compact spaces so your hands do not have to cross the beam path for adjustment.
• MFM Flexure Mirror Mounts: designed for "set and forget" applications.

HVM-Series
MFM-Series Optic Diameters 0.5, 1 and 2 in. 0.5, 0.75 and 1 in. Resolution 80 and 100 TPI 80 and 100 TPI Angular Range ±2.5°, ±3° and ±3.5° ±2.5° Material Anodized Aluminum, Stainless Steel Stainless Steel Drive Types Hex Key Hex Key Lockable Versions Yes No Other Features Front- and Rear-Loading Versions Shock Resistant
Front- and Rear-Loading Versions
Adhesive wells for permanent mounting

• A-Line™ Fixed Position Lens Mounts: fast, easy and economic mounting, aligning and focusing of optics.
• Compact Lens Positioners: ideal solution for applications with limited table space.
• LP Precision Multi-Axis Lens Positioners: highest performing lens positioners.

A-Line
Compact
LP-Series Optic Diameters 0.5 to 3 in. 0.5, 1 and 2 in. 0.5, 1 and 2 in. Resolution - 100 TPI 100 TPI Adjustments Fixed XY, XYZ, XYZθxθy XY, XYZ, XYZθxθy Material Aluminum Aluminum Aluminum Other Features Self-aligning design
Large clear aperture
Compatible with A-Line alignment system Adapters for other optics
Lockable positions Zero-freeplay XY mechanism
True Gimbal adjustments
Independent non-influencing locks
Adapters for other optics

• Ultima® Gimbaled Cube/Prism Mount: precision alignment of beamsplitter cubes and prisms.
• RSP High Performance Optic Rotation Mounts: smooth, continuous 360° rotation of optics.

UGP-1
RSP-Series Optic Size 0.5 and 1 in. cube 1 and 2 in. Resolution 100 TPI 4 arc min Angular Range ±5° 360° Material Aluminum Aluminum Drive Types Knob w/ Hex Hole Coarse: knurled edge
Fine: knob Lockable Yes Yes Other Features True gimbal motion
Adapters for other optics Full ball bearing races
Adapters for other optics

• PX Forkless Optical Pedestals: Long-term stability of a pedestal at 1/3 the space.

PX Post PX Pedestal Diameter 1 in. 1 in. with 1.25 in. flange Heights 1, 2, 3 and 4 in. Material Stainless Steel Other Features Accessories for varying heights and mounting configurations

Vibration Control

For applications that require holding alignments in place, we offer a comprehensive range of vibration isolation and damping solutions to ensure a stable system.

If you are looking for more details, kindly visit amoled panel manufacturer.

Breadboards
Workstations
Table Systems
Tables and Legs Dimension Few feet Few feet Several feet, custom sizes Several feet, custom sizes Thickness Few inches Few inches Several inches, custom thickness Several inches, custom thickness Portability Must be carried or placed on "cart" Casters on legs are standard Larger, heavier, optional casters Larger, heavier, optional casters Isolation None ✓ ✓ ✓ Damping ✓ ✓ ✓ ✓ Setup Base model comes assembled Base model comes assembled Support frame included but not assembled
May need help from riggers Tables, legs sold separately
May need help from riggers