The Aluminum Suspension (ALS) Clamp is intended for use on all aluminum-based conductors. PLP recommends placing Armor Rods over the conductor at suspension points to minimize the static and dynamic stresses at the ends of the clamp as well as extend the life of the conductor. The standard ALS Clamps are designed for continuous conductor operating temperatures up to 125°C (150°C for two-hour emergencies).
You will get efficient and thoughtful service from Electric Powertek.
Contact us to discuss your requirements of suspension clamp bracket. Our experienced sales team can help you identify the options that best suit your needs.
JBernard_401 wrote:keeptwostrokesalive Posts Joined 9/22/ Location Bloomingdale, GA US keeptwostrokesalive 11/25/ 7:06pm 11/25/ 7:06pm
jhansen510 wrote:keeptwostrokesalive Posts Joined 9/22/ Location Bloomingdale, GA US keeptwostrokesalive 11/25/ 7:10pm 11/25/ 7:10pm coastie44 Posts 561 Joined 1/19/ Location NorCal, CA US coastie44 11/25/ 9:12pm 11/25/ 9:12pm
keeptwostrokesalive wrote: I also think my handlebars might have something to do with the problem, they have very little bend toward me. When other people ride my bike...CarlinoJoeVideo Posts Joined 11/30/ Location Portland/Los Angeles, CA US CarlinoJoeVideo 11/26/ 4:48am 11/26/ 4:48am keeptwostrokesalive Posts Joined 9/22/ Location Bloomingdale, GA US keeptwostrokesalive 11/26/ 7:04am 11/26/ 7:04am
keeptwostrokesalive wrote: I also think my handlebars might have something to do with the problem, they have very little bend toward me. When other people ride my bike...keeptwostrokesalive Posts Joined 9/22/ Location Bloomingdale, GA US keeptwostrokesalive 11/26/ 7:05am 11/26/ 7:05amcoastie44 wrote: Get some different handlebars first. Get a fairly low bend and position them neutral (even with the plane of the forks) or tilted back toward you...
CarlinoJoeVideo wrote: Could be suspension set problem. Make sure your sag is set correct and also can mess around with the fork tube height in your current clamps...keeptwostrokesalive Posts Joined 9/22/ Location Bloomingdale, GA US keeptwostrokesalive 11/26/ 7:44am 11/26/ 7:44am coastie44 Posts 561 Joined 1/19/ Location NorCal, CA US coastie44 11/26/ 8:21am 11/26/ 8:21am Edited Date/Time 11/26/ 8:22am
CarlinoJoeVideo wrote: Could be suspension set problem. Make sure your sag is set correct and also can mess around with the fork tube height in your current clamps...keeptwostrokesalive Posts Joined 9/22/ Location Bloomingdale, GA US keeptwostrokesalive 11/26/ 8:27am 11/26/ 8:27amkeeptwostrokesalive wrote:
coastie44 wrote: Wow! Sorry my advice should be taken with a grain of salt then. I'm 5'10" and that's what I need to do to get on top...keeptwostrokesalive Posts Joined 9/22/ Location Bloomingdale, GA US keeptwostrokesalive 11/26/ 8:31am 11/26/ 8:31am
keeptwostrokesalive wrote: Looks like I'm going to go with woods low bend pro taper contour 1 1/8 bars, and some tusk universal clamps in case I want to...mxfiend Posts 310 Joined 1/30/ Location Riverside, CA US mxfiend 11/26/ 8:38am 11/26/ 8:38am seth505 Posts Joined 4/1/ Location SD, CA US Fantasy seth505 11/26/ 8:58am 11/26/ 8:58am keeptwostrokesalive Posts Joined 9/22/ Location Bloomingdale, GA US keeptwostrokesalive 11/26/ 9:00am 11/26/ 9:00am
seth505 wrote: I had an 09 yz and I thought it pushed in corners a bit much. I put on shorter offset clamps (22.5mm) and it turned better...keeptwostrokesalive Posts Joined 9/22/ Location Bloomingdale, GA US keeptwostrokesalive 11/26/ 9:00am 11/26/ 9:00am
mxfiend wrote:seth505 Posts Joined 4/1/ Location SD, CA US Fantasy seth505 11/26/ 9:10am 11/26/ 9:10am
seth505 wrote: I had an 09 yz and I thought it pushed in corners a bit much. I put on shorter offset clamps (22.5mm) and it turned better...keeptwostrokesalive Posts Joined 9/22/ Location Bloomingdale, GA US keeptwostrokesalive 11/26/ 9:43am 11/26/ 9:43amkeeptwostrokesalive wrote: When you say pushed, do you mean it had a tendency to want to dive in the corners? If so I am not having that problem...
seth505 wrote: I had an 09 yz and I thought it pushed in corners a bit much. I put on shorter offset clamps (22.5mm) and it turned better...seth505 Posts Joined 4/1/ Location SD, CA US Fantasy seth505 11/26/ 10:21am 11/26/ 10:21amkeeptwostrokesalive wrote: When you say pushed, do you mean it had a tendency to want to dive in the corners? If so I am not having that problem...seth505 wrote: I mean that when I entered a turn and initiated the turn, the bike would want to push straight rather than 'carve' the turn. I was...
keeptwostrokesalive wrote: When you say pushed, do you mean it had a tendency to want to dive in the corners? If so I am not having that problem...keeptwostrokesalive Posts Joined 9/22/ Location Bloomingdale, GA US keeptwostrokesalive 11/26/ 11:15am 11/26/ 11:15amseth505 wrote: I mean that when I entered a turn and initiated the turn, the bike would want to push straight rather than 'carve' the turn. I was...keeptwostrokesalive wrote:
seth505 wrote:jhansen510 Posts Joined 2/10/ Location GREENFIELD, MN US jhansen510 11/26/ 3:03pm 11/26/ 3:03pm deltamotocross Posts 192 Joined 9/19/ Location Blytheville, AR US deltamotocross 11/26/ 3:09pm 11/26/ 3:09pm keeptwostrokesalive Posts Joined 9/22/ Location Bloomingdale, GA US keeptwostrokesalive 11/26/ 6:06pm 11/26/ 6:06pm
jhansen510 wrote: I think many tall guys think they need super tall bars but they forget to account for the extra long arms. If you look at the...